Signals

If you are not using a Loopworks Measure R1 and Measure App with LoopLink for automated hearing loop testing you can use the following test signals to help ensure your loop systems meet performance standards.

Download the files (below) and extract them to a folder on your computer or device.

Play the test signal through the loop system being tested.

Measure the signal at suitable points throughout the area using a field strength meter such as the Loopworks Measure R1 and App or Ampetronic FSM.

Record the results and check for a Pass, Unqualified Pass or Fail.

See the videos below or visit https://www.ampetronic.com/info-centre/services/loop-installation/ for more information on loop installation and commissioning.

See also:

The Ampetronic YouTube Channel (https://www.youtube.com/user/AmpetronicLoops) for the latest tips and training videos, like the ones shown below.

Perimeter loop metal loss tests 
PlayPlay
Figure 8 metal loss tests
PlayPlay
Installing a low spill multiloop
PlayPlay
Commissioning an area coverage system
PlayPlay
Using LoopLink within Loopworks Measure
PlayPlay
Installing a counter loop system
PlayPlay
Commissioning a counter loop system (FSM)
PlayPlay
Perimeter loop metal loss tests 
Perimeter loop metal loss tests 
Figure 8 metal loss tests
Figure 8 metal loss tests
Installing a low spill multiloop
Installing a low spill multiloop
Commissioning an area coverage system
Commissioning an area coverage system
Using LoopLink within Loopworks Measure
Using LoopLink within Loopworks Measure
Installing a counter loop system
Installing a counter loop system
Commissioning a counter loop system (FSM)
Commissioning a counter loop system (FSM)
previous arrow
next arrow

Click here to contact us for more information