C-series firmware update: C Series v1.6.0
Release date: September 2023
Priority: Low
Includes two separate files (V1.6.0) for both C-series firmware and website and a third file containing the changelog and release notes.
Neither updates are fully compatible with previous versions of the other, so must be installed & used together.
Please follow the link below to download the zip file containing the latest firmware and website updates for C-Series amplifiers and follow the install process.
Contents:
- alp.bin
- cwebsite.bin
- v1.6.0 Release Notes.txt
Description of change:
- Added SNMP V3 support
- Adds SNMP version options of V1 & V2C with V1 traps (matches previous implementation), V2C or V3
- SNMP V3 supports MD5, SHA1-96 or SHA2-256 auth protocol and DES or AES-128 priv protocol
- Updated jQuery libraries to latest available versions at time of release
Instructions for use:
- Click the button to download the zip files required.
- Load “Alp.bin” and “cwebsite.bin” from the zip file into the root directory (not in a folder) of a FAT32 formatted USB drive.
- With the C-series unit switched on, insert the USB drive into the “USB Update Only” socket on the rear panel.
- On the front panel, press and hold the “Back / Standby” button until the Standby menu appears.
- Scroll and select “Restart”.
- The unit will restart – DO NOT TURN OFF THE POWER. The front panel LED will flash amber, then the unit will start as normal. This should take only a few seconds. The LED will continue to flash amber while the revised website is loaded. All previous user settings will be maintained and applied.
- Remove the USB stick from rear panel.
If you have any queries please contact us: support@ampetronic.com or call +44 (0) 1636 610062