Ampetronic supplies a wide range of equipment and accessories to match your input audio requirements. We also provide comprehensive advice on audio systems for connection to induction loop systems β if you donβt find what you need here, please contact us.
We have three electret style microphones for direct connection the CLD1, ILD20 and ILD100, or to other amplifiers with input adaptors (see below).
Ampetronic preamplifiers allow interfacing with more inputs than are available on standard amplifiers.
Please note, if you are not using the integral power supply from one of our professional rack mounted amplifiers (ILD122, ILD300, ILD500, ILD1000G) then these preamplifiers require the Ampetronic power supply PS3.
Ampetronic input adaptors are available to convert a wide range of different inputs to match the inputs of your chosen amplifier. The following are our standard adaptors, please contact us if you can not find what you need.
Get adaptor datasheet for MAT and ATT series.
Adaptor |
Input |
Output |
Suitable for |
ATT30 |
Low impedance speaker input Special 3 way connector |
Balanced line 6.3mm stereo plug |
ILD122 ILD300 ILD500 ILD9 ILD1000G |
ATT100 |
100V speaker line Special 3 way connector |
Balanced line 6.3mm stereo plug |
ILD122 ILD300 ILD500 ILD9 ILD1000G |
ATT100-T70 |
100V speaker line Special 3 way connector |
Unbalanced microphone (electret style) 3.5mm mono plug |
ILD100 ILD20 CLD1 |
MAT1 / 1DC |
Unbalanced electret microphone 3.5mm mono plug |
Balanced microphone with +/- 15V phantom power or DC power supply. XLR socket(1) 7 pin DIN (1DC) |
ILD122 ILD300 ILD500 ILD9 ILD1000G |
MAT60 |
Balanced microphone XLR Socket |
Unbalanced electret microphone 3.5mm mono plug Requires DC power supply |
ILD100 ILD20 CLD1 |
Free entrance on 31st Jan - 2nd Feb 2012 using out promotional code
Ampetronic will be exhibiting at the Institute of Sound and Communications Engineers Exhibition and Seminar Day, Tuesday 28th February 2012, 9.30am -5pm
